Aprilaire Dryer Vent Cleaning Nationwide

Aprilaire Dryer Vent Cleaning in Alexandria: What to Know First

CleanRun provides independent Aprilaire dryer vent cleaning in Alexandria with a written price delivered before any work starts and a documented photo record of every vent run. Most Aprilaire dryer vent jobs in Alexandria are completed in a single visit, with typical whole-system cleaning ranging from $195 to $385 depending on vent length, accessibility, and whether the job includes a bird guard or cap replacement. We are not affiliated with or authorized by Aprilaire; we are an independent service provider who has worked on these systems in Alexandria homes since 2013. If you own an Aprilaire vent booster, humidity-sensing control, or integrated whole-home system and need the vent line cleared, inspected, or rerouted, call us at (240) 318-7712. The estimate is free, and the price we write down is the price you pay.

Call (240) 318-7712

How Aprilaire Products Fail - and How We Fix Them

• Model 1750A and 1770A Vent Boosters - Motor Housing Lint Intrusion. These inline boosters sit mid-run in longer vent lines common in Alexandria’s three-story townhomes near Old Town. The sealed motor housing isn’t as sealed as the manual suggests. We find lint accumulation inside the housing that causes thermal cutout failure, not motor burnout. Our fix: remove the booster, clean the housing with compressed air and a soft brush, test amp draw against Aprilaire’s 0.8A spec, and reinstall only if the housing gasket seats clean. If the gasket is distorted, we source the Aprilaire 4790 gasket kit or a cross-matched silicone equivalent and document the choice on your written scope.
• Model 8126X Ventilation Controller - Backdraft Damper Sticking in Humid Months. Alexandria’s Potomac humidity, especially in July and August, swells the foam-rimmed damper on these units. The symptom homeowners report is “the dryer takes two cycles,” but the real problem is the damper hanging open 3/8 inch, letting humid outside air back-feed into the line. We measure the gap with a feeler gauge, clean the damper track with a non-residue solvent, and replace the foam rim with a closed-cell neoprene strip that handles our local moisture profile better than the OEM foam. The duct doesn’t lie - we just show you what’s in it.
• Model 1850W Dehumidifier-Vent Integration - Clogged Condensate Drain Triggering False Vent Alarms. In Alexandria’s Del Ray neighborhood, we’ve seen three of these in colonial-era homes where the previous owner tied the dehumidifier drain into the washer standpipe. Lint from the washer backs up into the condensate line, the 1850W throws a vent obstruction code, and a less careful tech chases the wrong problem. We scope the actual dryer vent run separately from the condensate path, clear each independently, and show the customer both camera feeds so they understand why the alarm happened.
• Aprilaire Flexible Duct Adapter Kits - Squeeze Points at Elbows in Tight Framing. Aprilaire’s 6-inch to 4-inch reducer, common in retrofit installations, has a ribbed section that collapses to a 2.8-inch oval when forced through a 2×4 stud bay in Alexandria’s older homes. The restriction doesn’t trigger a booster failure immediately; it just loads the dryer motor and extends dry times by 40% or more. We identify these with a borescope at the first elbow, document the minimum diameter, and replace the crushed section with rigid aluminum pipe where framing allows or a smooth-wall flex where it doesn’t.
• Model 8476 Timer Controls - Stuck Contacts Sending Continuous Run Signals. These older mechanical timers still appear in Alexandria homes built during the 2008-2012 window. The contacts weld closed after roughly 8-10 years of duty cycles, meaning the vent fan runs continuously or not at all depending on which contact set fails. We test with an ammeter at the junction box, confirm the diagnosis before quoting, and offer either the Aprilaire 8476 direct replacement or a digital upgrade if the homeowner wants programmable humidity thresholds. Both options are priced in writing before we touch a wire.

Our Aprilaire Dryer Vent Cleaning Process

1. 1
   Arrival and System Identification. We confirm the Aprilaire model numbers from the nameplates, photograph the installed configuration, and check for any homeowner-added modifications common in Alexandria’s active DIY market.
2. 2
   Written Price Delivery. Before removing any access panel, we deliver a written price under Haven Standard Clause 1. This is not an estimate range; it is the exact price for the agreed scope. If we find something unexpected during the work, we stop, photograph it, and write a revised scope before continuing.
3. 3
   Negative-Pressure Extraction and Borescope Survey. We connect our Nikro HEPA vacuum to the vent line and run a Rotobrush mechanical agitator through the full duct run. A borescope camera follows behind, recording the before condition of every elbow, booster location, and termination point. The customer sees these images in real time or receives them in the job record.
4. 4
   Component-Specific Service. Aprilaire boosters get housing disassembly and gasket inspection. Humidity controls get damper cycling tests. Any part we touch is noted on the written scope with its condition and our action.
5. 5
   Post-Clean Verification and Photo Record. We run a final borescope pass, capture after images of every run, and measure airflow at the exterior termination with a calibrated anemometer. The photo record, written scope, and 365-Day Done Right Promise are delivered as standard.

Before

After

What Aprilaire Dryer Vent Cleaning Costs in Alexandria

These are the whole-system prices we have written on Aprilaire dryer vent jobs in Alexandria. No per-vent add-ons, no coupon bait.

• Standard vent cleaning, single-story run up to 15 feet: $195-$245
• Two-story or extended run with one elbow: $265-$325
• Run with Aprilaire inline booster service (1750A/1770A): add $75-$110 for housing clean, gasket inspection, and amp test
• Bird guard or vent cap replacement with cleaning: $340-$385 including hardware
• Vent rerouting for code compliance or accessibility: priced on inspection, written before work starts

What moves the price: length of rigid duct versus flex, number of elbows, whether the termination is roof-access or through-wall, and whether we find a failed component that needs replacement versus cleaning. We also service Lennox, Trane, and Carrier vent systems with the same written-price protocol. Call (240) 318-7712 for an exact quote - estimates are free.

Why Alexandria Homeowners Call CleanRun Air Duct Cleaning Alexandria for Aprilaire Work

We’ve been in Alexandria homes since 2013, and we’ve learned that Aprilaire systems reward a technician who reads the manual once and the ductwork a hundred times. Our crew is background-checked and uniformed under Haven Standard Clause 3: Verified Crews. Tomas Reyes, our owner and lead technician, grew up in Queens and trained at Apex Technical School in Long Island City before spending two decades on mid-Atlantic ductwork of every configuration. He and our team have handled the pinched flex ducts in Del Ray’s older homes and the humidity-swollen dampers in waterfront properties near Founders Park. Every job carries the 365-Day Done Right Promise in writing, not as a policy subject to manager approval. If you have a competitor’s written estimate, we provide a free second opinion with our number next to theirs.

FAQs